Best Wi-Fi smoke detectors Tuya Emastiff

WiFi Smoke Detector TYYG2 Tuya Smart Life APP Control Smoke Detector WiFi Alarm Smoke Detector Sensor

This WiFi strobe smoke detector is the device that can detect smoke produced at the beginning of a fire disaster and generate live strobe and sound alarm, at the same time, send the alarm information to the mobile app via WiFi.

1. Technical parameter
Power supply: DC9V alkaline battery (not include 6LR61)
Static current:<10uA
alarm current: <ma
Working temperature: 0℃~+50℃
Humidity: ≦ 95% RH, no freezing
Alarm sound:>80dB
Low battery alert: ≦ 7.0 V ± 0.2 V

2. Silencing and testing

Silence: in alarm status, press the "test" button to silence the buzzer, only the LED indicator flashes.
Test: in normal state, press and hold the "test" button for 2s to activate the sound and light alarm, the alarm message is sent to the mobile application.

3. WiFi and network settings

Install the tuya Smart app on your smartphone the first time you use the detector.
Make sure your smartphone is connected to WiFi.

A) Launch the app, click 'Add Device' — 'Security Sensor' — 'Sensor (WiFi)' / 'Smoke (WiFi)'.
B) Press and hold the “Test” button for 5s until the LED flashes with a short beep of “di” (long press the button within 20 seconds after charging the battery to enter WiFi setting mode).
C) Click “OK” in the app — enter the password for WiFi, click “OK”, the detector enters setting mode which lasts for 60s at most.

One long beep of “di” when the LED indicator is on for 10s, it means the Wifi setting is completed. When WiFi setup fails, the detector exits setup mode with a short 'Di Di' beep.

WiFi configuration is based on the above 3 steps.

WiFi network status: when the LED indicator is on for 10s after charging the battery, it means the detector is successfully connected to WiFi.

4 Installation method
A. Drill a hole in the ceiling using the hammer drill
B. Install the expansion tube on the roof
C. Fix the installation plate using the screw
D. Point the alarm device with the installation plate and connect them, rotating clockwise until hearing the sound "kaca", it means install it correctly